bladerf-flash(1)

NAME
bladerf-flash - bladeRF flashing utility

SYNPOSIS

bladeRF-flash <options>

DESCRIPTION

The bladeRF-flash utility is used when you are having a very bad day.

For more information on obtaining or building firmware files and FPGA bitstreams, please visit http://nuand.com/.

OPTIONS

The program follows the usual GNU command line syntax, with long options starting with two dashes (--).

-d, --device <device>
    Use the specified bladeRF device.

Note:
    The -d option takes a device specifier string. See the bladerf_open() documentation for more information about the format of this string.

-f, --flash-firmware <file>
    Flash specified firmware file.

-r, --reset
    Start with RESET instead of JUMP_TO_BOOTLOADER

-l, --load-ram
    Only load FX3 RAM instead of also flashing.

-L, --lib-version
    Print libbladeRF version and exit.

-v, --verbosity <level>
    Set the libbladeRF verbosity level. Levels, listed in increasing verbosity, are: critical, error, warning, info, debug, verbose

-V, --version
    Print flasher version and exit.

-h, --help
    Show this help text.

ALSO

bladeRF-cli(1).

More documentation is available at http://nuand.com/ and https://github.com/nuand/bladerf.

AUTHOR

bladeRF-flash was written by the contributors to the bladeRF Project. See the CONTRIBUTORS file for more information.